Detailed procedure describing the steps to be followed to restart the system when all indicator LEDs start blinking together, indicating that the system has gone into short-circuit mode. Reset code is – *123#
The know hows for setting up the entire system – Part One. Make sure the switches are turned OFF at the start. Description of switches – system and Light. Membrane keypad – indicator lights and symbols. On the back- terminal connectors, resetting of battery at the terminal, and how to connect wires.
Integrated Inverterless – Battery Management System Replacement of Battery Management System (BMS) for replacement – by SKILLED AUTHORIZED PERSONNEL only. WARNING: Customers should not try this by themselves.
Solar DC Product Installation for home &office. Addition of antenna to the system, for connection to remote server. Press *253# for activating BLE (Bluetooth) mode and fetch data to mobile. Press *476# for activating GPRS mode. Data to be sent to the cloud server with the help of GSM SIM card and antenna. Press *256# […]
Solar dc solutions for homes and offices. Connect system to Solar and keep it in standby mode for 24 hours before starting. Switch off LIGHT and SYSTEM switch till then. After Battery SoC gets more than 70%, we can switch on the loads. First connect SOLAR terminals, then LOAD connection and then EMERGENCY connection. Turn […]
How to install Integrated Invertless system? Energy efficient solutions using solar power for every home and business. Look for scratches and dents on the body for any damage. On the back side, you will find FUSE panel, Installation description, terminal endings. On the front side, you will find keypad and indicator LEDs. First, RESET the […]